VMware ESX Configuration Maximums Comparison Matrix

Have you ever needed an easy to reference way to see what the configuration maximums are for different versions of VMware ESX.  I know I seem to need this all the time.  I find it a huge pain to keep referring to each of the individual VMware documents to get the answers.  Sometimes I also want to see what the changes are between versions and I can’t seem to memorize this information in my tiny little brain.  So I went ahead and created a “Configuration Maximums Comparison Matrix” based on the VMware Configuration Maximums for each version.

You’ll notice some settings don’t have values for each version.  This is because they were not published in the VMware documents.  As I go through some additional documents and extract these values I will update the document to reflect.  For no the document does include everything from the VMware Configuration maximums published for each of these Versions:

VMware ESX 3
VMware ESX 3.5 & ESX 3.5 Update 1
VMware ESX 3.5 Update 2, Update3, & Update 4
VMware vSphere 4.0 (ESX 4)

You can find the document in our downloads section or you can click here. Hope you find this useful I know I will.

vSphere Install and Upgrade Best Practices KB Articles and Links

So, I use NewsGator to aggregate a BAZILLION feeds from several sources, blogs, like this one, actual news feeds and a bunch of VMware feeds. The VMware feeds are from the VI:OPS and VMTN forums. The VMTN forums allow you to create a custom feed by selecting the RSS link at the bottom right of each page or you can get a feed from a specific section of the forum by clicking the link on the bottom left of a list. On of the custom feed options is to get a feed of the new KB articles.

VMware has released quite a lot of new KB articles surrounding vSphere. They just released nice best practice guidelines for installing or upgrading to ESX 4 and vCenter 4. They are short and to the point. There is also a nice article covering best practices for upgrading an ESX 3.x virtual machine to ESX 4.0. One thing I noticed, but never thought about is this :

“Note: If you are using dynamic DNS, some Windows versions require ipconfig/reregister to be run.”

Eric Seibert over at vSphere-Land posted a nice set of “missing links” for everything vSphere. This is a nice, comprehensive set of links to evetrything you need for vSphere upgrades or installs.So, go check that out as well.

VMware vSphere Upgrade Path Overview

Many of you are wonder how you will go about upgrading to VMware vSphere when it is release. Well I’m here to say don’t worry. The upgrade path from ESX 2.x & 3.x is very painless and fairly simple. A lot of you will remember all the phone you have had in the past performing upgrades and scripting installs, well VMware is quickly trying to make all of that a thing from the past with new features available in vSphere.

Read More here

Just some more vSphere information

Here is some information about vSphere that I thought would be good to share with the world. As with everything else this is just a drop in the bucket. I’m currently working on putting together some upgrade videos and screenshots so take a look back and hopefully I will have them done by the end of the week.

Here is some interesting information about vSpehere and what it supports keep in mind these are just some notes I jotted down:

ESX 4 Hosts (vSphere Host)
256VM’s per host
64 Cores per host
512GB Ram per host

vSphere VMs (Hardware version 7)
8 vCPUs
256GB Ram
VMDirectPath I/O
Hot Plug Support (Supports CPU’s and Memory)
ESX 2.x and 3.x VM support
Paravirtual SCSI adapter
MSCS 2008
Persistent Reservations in vmkernel
LSI Logic SAS (Virtual SAS controller)

Networking Improvements
New iSCSI stack with 10-30% improved performance
TCPIP 2 Support (Based on FreeBSD 6.1 / IPv6 / locking and threading capabilties)
VMXNet3
MSI/MSI-X
Receive Side Scaling
VLAN offloading
VMware Directpath I/O

Storage Improvements
SCSI-3 Compliant
VMFS still SCSI-2
Target PortGroup Support (TPGS)
Asymmetric Logical Unit (ALUA)
Pluggable Storage Architecture (PSA)
Updated iSCSI stack
Native SATA

Service Console
64-bit, 2.6 based Linux kernel compatible with RHEL 5.2
Supports for both 32bit and 64bit applications
root file system stored in VMDK
vmkernel runs and owns device drivers only 64-bit
Address Space layout Randomization (ASLR)
No Linux dev packagers and libraries

CPU
Enhanced Intel step down
Enhanced AMD Power Now

Security
Trusted Platform Module (TPM)
Digitally signed and validated modules
Memory integrity techniques with microprocessor capabilities to protect against buffer-overflow

Guided Consolidation
500 Simultaneous Physical Machines
Modular Plug-in can be installed on different machine

Coverter

Physical / Virtual / 3rd party
Server 2008 Support
Covert Hyper-V Machines to VM’s

Update Manager

ESX / ESXi and Virtual Appliance Upgrades
Upgrade Virtual Hardware
VMware Tools
Base Line Groups

Upgrade vcenter steps

No SQL 2000 Support
2.x & 3.x Upgade Path
Upgrade vCenter
Upgrade Update Manager
Use Upgrade Manager to Upgrade Hosts
Upgrade VMware Tools, then the VMware Hardware.

vSphere Host Update Utility
3.x to 4.x
Dosn’t Upgrade VMFS Datastores or VMs
Installs with vSphere client
Support Rollback for ESX only
Can be used to install patch releases to standalone hosts
Copies Script and ISO to ESX hosts reboots and installs

FLASH: ESX 4 Console OS is REALLY a VM this time!

While I was setting up ESX in text mode for my next blog post, I discovered that the installation sequence first creates a VMFS file system and then creates a VMDK file for the console OS. I confirmed it in the VIC. Here is a screen shot:

2009-04-29_174111

Click to enlarge image

I also noticed that the logs are now in a separate directory:

2009-04-29_174129Click to enlarge image.